Carton reciprocating elevator

Taxonomy:Box conveying system
Click times:
Date of release:2019/05/08
Specifications:
Type:
inquiry

introduce

Carton reciprocating elevator：

The working principle of the reciprocating elevator is that the driving device drives the chain through the sprocket, and the two ends of the chain are respectively connected with the loading table and the counterweight component, and the positive and negative rotation of the motor can realize the lifting and lowering of the loading table.

One. main mechanical structure and features：

Body: cold rolled steel plate.

Outer sealing frame: wire mesh sealing frame is adopted.

Loading platform: after cold rolling of steel plate, it is welded into a whole.

Loading conveyor: multi - chock roller table machine, structure as mentioned above.

Surface coating: steel wire brush and sandpaper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 90 m. Spraying color shall be specified by party a's color card.

Purchased parts configuration: motor adopt SEW, chain adopt hangzhou donghua, bearing base adopt TR, bearing adopt ha shaft.

Two. Main performance and parameters：

	形式描述：Description u 四立柱框架式； Four column frame type u 带配重，置于框架内侧； Use weight block inside u 导轨采用电梯要求标准； Guide rails with elevator requirements u 四链条提升，链条规格16A-1； Four 16A-1 lifting chain u 驱动置于提升机顶部； Drive unit at the top u 封框：网片形式； Mesh cover around u 配合辊道机、链条机或货叉使用； Roller conveyor/chain conveyor inside u 断链保护装置； Broken chain protection device
标准样式 Type
标准 Standard	描述 Description
长度L (mm) Length of inside conveyor	L= pallet length + 200
高度Height (mm)	地坑深度H(min) =500 Min height of conveyor connecting to lifter is 500mm 顶层高度H(min) =输送面+货物高度+1500 Min. top height of lifter = conveyor height + Pallet height + 1500
宽度 W (mm) Width of lifter	W=托盘宽度 pallet width +950( inside chain conveyor) W=托盘宽度 pallet width +1030（inside roller conveyor）
电机功率P (kw) Motor power	提升Lift：7.5～11 输送Transfer：0.75～1.5（chain conveyor） 0.37～0.75（roller conveyor）
提升速度V (m/min) Lift speed	Max 60
整机承载 Unit payload(Kg)	Max 1500Kg