Pallet pop-up table

Taxonomy:Pallet conveying system
Click times:
Date of release:2019/05/08
Specifications:
Type:
inquiry

introduce

Pallet pop-up table:

One. main structure and features:

Jacking mechanism: welding type bottom frame with height adjusting foot, base type deceleration motor is placed in the middle of the bottom frame, two shafts are connected by bearing pedestal and bottom frame on both sides respectively, two shafts are connected with the motor by driving chain respectively. Each shaft and both ends are equipped with needle roller bearing crank arm to form the jacking structure.

Bottom bracket: M20 screw adjusting pin is fixed to the ground (two mounting holes for anchor bolts).

Accessory device: photoelectric support (lift two positions, in place detection).

Purchased parts configuration: reducer motor SEW, chain for hangzhou donghua, bearing with seat TR, ha shaft for bearing.

Surface coating: steel wire brush, sand paper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 80 m.

Two. Main performance and parameters:

形式描述：Description

u 焊接式底框

Welded bottom frame

uR系列内置电机

R series built-in motor

u 凸轮升降，行程Max.200mm

CAM lifting, travel Max.200mm

u设备类型中间式

Intermediate device type

标准样式Type

标准Standard

描述Standard

本体长度L（mm）

Body length

L=配合链条机中心距B-100

L = matching chain machine center distance B - 100

高度Height (mm)

H(min)≥580(配合链条机H=600)

H(min) ≥580(with chain machine H=600)

顶升臂中心距B (mm)

Center distance B of jacking arm

350 ≤ B ≤ 2000；

电机功率P (kw)

Motor power

升降:1.5～3

Lifting :1.5 ~ 3

升降时间（S）

Lifting time (S)

5 (单行程)

five(single stroke)

标准承载（Kg）

Standard load (Kg)

Max ≤1000Kg

最大承载 (Kg)

Maximum load (Kg)

Max ≤1500Kg

The address of this article:http://en.rigorwl.com/product/601.html

Key word:Palletpop-uptable,Palletconveyingsystem,mainstructure

last:Pallet Chain Turntable
next:Pallet RGV

Product

News

Contact