Pallet chain lift transfer unit:
One. main structure and features：
Jacking mechanism: the base type deceleration motor is placed in the middle of the welding type bottom frame with adjustable feet. The two shafts are connected by the bearing seat and bottom frame on both sides. The two shafts are connected with the motor through the transmission chain. Each shaft and both ends are equipped with needle roller bearing crank arm to form the jacking structure.
Load shifting mechanism: adopt chain machine, the specific structure is the same as the foregoing.
Accessory device: photoelectric support (lift two positions, in place detection).
Purchased parts configuration: reducer motor SEW, chain for hangzhou donghua, bearing with seat TR, ha shaft for bearing.
Surface coating: steel wire brush, sand paper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 90 m.
Two. Main performance and parameters：
| 形式描述：Description u 两排输送链C10B-2 Two row conveyor chain c10b-2 u 聚乙烯链托 Polyethylene chain holder u 机架型钢 120×70×15×4mm Frame steel 120 x 70 x 15 x 4 mm u R系列内置电机 R series built-in motor u 凸轮升降，行程70mm CAM lifting, travel 70mm u 设备类型 中间式 Intermediate device type |
标准样式Type | |
标准Standard | 描述Standard |
本体长度Length（mm） | L=配合链条机中心距B-100 L = matching chain machine center distance B - 100 |
高度Height (mm) | H(min)≥550(配合链条机H=600) H(min)≥550(with chain machine H=600) |
链条中心距B (mm) Chain pitch | 650 ≤ B ≤ 1750（SEW电机）； 650 ≤ B ≤ 1750（SEW motor） 550 ≤ B ≤ 1750（城邦电机）； 550 ≤ B ≤ 1750（city motor） |
电机功率P (kw) Motor power | 升降:0.75～1.5 Lifting :0.75 ~ 1.5 输送:0.75～1.5 Conveying :0.75 ~ 1.5 |
输送速度V (m/min) Line speed | V=12 V=16 V=18 |
升降时间 （S） Lifting time (S) | 2.3 (单行程) 2.3(single stroke) |
标准承载 （Kg） Standard load (Kg) | Max ≤1000Kg |
最大承载 (Kg) Maximum load (Kg) | Max ≤1500Kg |
